Enclosed switch — connector side — source-CAD reference
Networking
R1 5-Port 100 Mbps Ethernet Switch — Enclosed
Five-port 100 Mbps Ethernet switch with D-coded M12 connectors in a compact aluminum enclosure.
Pricing on inquiry
You’ll send your contact details with your cart. Product details and pricing are confirmed by our team.
Product details
The R1 5-Port 100 Mbps Ethernet Switch — Enclosed brings five M12 D-coded Ethernet connections into a compact aluminum housing for machine networks, robotics and automation systems. The enclosed format combines the switch board and housing for equipment integration. A single A-coded M12 connector provides the DC power input. Review mounting and cable requirements for the installation. Connector caps are included. Cables are not included.
$399 USD per switch. In stock. No production lead time; shipping time applies.
| Ports | 5 Ethernet ports with M12 D-coded connectors |
|---|---|
| Form factor | Aluminum enclosure |
| Dimensions | 101.6 × 73.15 × 35.56 mm (4 × 2.88 × 1.4 in); final dimensions pending CAD review. |
| Switching mode | Non-blocking store-and-forward |
| MAC address table | 4K entries |
| Packet buffer | 2 Mbit |
| Latency | Approximately 900 ns; conditions not specified |
| Input voltage | 9–36 V DC |
| Power connector | M12 male, A-coded, 5-pin |
| Reverse voltage protection | Pending electrical validation |
| Temperature range | −40 to +85 °C; R1 qualification pending |
| Humidity | 95%; condensation and test conditions unspecified |
| Ethernet connector | M12 female, D-coded, 4-pin |
| Auto-negotiation | Pending functional validation |
| Cable requirement | Cat5 or better twisted pair |
| Cable distance | 100 m reference maximum; operating conditions and validation pending |
| Ethernet rate | 10/100 Mbps |
|---|
| Power architecture | Single DC power input |
|---|
| Timing features | PTP / AVB support pending hardware/firmware review. |
|---|
| Included | Enclosed switch and connector caps |
|---|---|
| Cables | Not included |
Resources
CAD files
- Enclosure housing — STEPstep
Onshape housing reference with Stele logo engraving removed by suppressing Sketch 29 and Extrude 29 at the owner's request on October 15, 2026. Fit and current hardware revision require confirmation; not a manufacturing release.
- Enclosure housing, sticker variation — STEPstep
Onshape mechanical reference exported October 15, 2026. Alternate sticker geometry; retained separately. Fit and current hardware revision require confirmation; not a manufacturing release.
- Enclosure lid — STEPstep
Onshape mechanical reference exported October 15, 2026. Exported individually from the assembled lid; coordinate origin may differ from the housing. Fit and current hardware revision require confirmation; not a manufacturing release.