US cylinder — complete view
Hydraulic components
Hydraulic Cylinder — USA Made, with M12 4-Pin Sensor
USA-made Bailey Hydraulics custom/OEM welded hydraulic cylinder with spherical eye inserts, 1-inch pin holes, an M12 4-pin sensor connector and protective bracket.
$300.00 each. Shipping and tax shown at checkout.
Add to cart to buy online. Shipping and tax are calculated at checkout. Leave custom requirements blank to purchase.
Product details
USA-made Bailey Hydraulics custom/OEM welded hydraulic cylinder with spherical eye inserts, an attached sensor, M12 4-pin connector and protective bracket. Identified by the inventory owner as made by Bailey Hydraulics for a custom/OEM application. The original OEM customer and exact model are unspecified. Standard Maxim WSB catalog specifications do not apply to this cylinder. Seller-measured external dimensions include a 2.5-inch body outside diameter, approximately 1.13-inch rod diameter, 1-inch pin holes and 18.5-inch eye-center spacing in the photographed position. Port centers are 9.75 inches apart. Dimensions are sample measurements, not manufacturing tolerances; the photographed position is not verified as fully retracted. Bore, usable stroke, pressure rating, hydraulic action and port connection type are unverified. Sensor voltage, pinout, output and operating condition are unspecified. Confirm these details and mounting compatibility for your application before purchase. New and unused. Cosmetic marks and scuffs are from shipping, not prior use. Photographs show representative cosmetic condition. Price is per cylinder including the attached sensor and bracket shown, with no additional accessories. Dispatch within three business days after payment; shipping and tax are calculated at checkout. The downloadable drawing and STEP model are preliminary external references based on sample measurements. Some contours and locations are provisional; they are not manufacturing drawings or a verified fit model. Internal components and hydraulic passages are not modeled.
New and unused, with cosmetic shipping marks and scuffs. 100+ available. Priced per cylinder. Dispatch within 3 business days after payment.
| Construction | Welded cylinder with spherical eye inserts and protective sensor bracket |
|---|---|
| Country of manufacture | USA |
| Manufacturer | Bailey Hydraulics; identified by the inventory owner |
| Product type | Custom/OEM cylinder; exact model and original OEM customer unspecified |
| Body stamp | (06) 323854 =USA= BH 732128 01/24 |
| Body outside diameter (C) | 2.50 in; external diameter, not bore |
|---|---|
| Body length (J1) | 14.50 in, end face to rod-exit face |
| Rod outside diameter (D) | Approximately 1.13 in; sample readings 1.1280–1.1320 in |
| Exposed rod length (J2) | 1.00 in, rod-exit face to start of eye weld |
| Eye-center spacing (B) | 18.50 in in photographed position; fully retracted position unverified |
| Pin-hole diameter (F/G) | 1.00 in, both ends |
| Eye housing outside diameter (E/H) | 2.75 in, both ends |
| Eye housing width (I1) | 1.1785 in, both ends |
| Spherical insert width (I2) | 1.75 in, both ends |
| Spherical insert outside diameter (I3) | 2.00 in, both ends |
| Rod-end inset face diameter (N1) | 2.38 in; recess depth unverified |
| Port center spacing (A) | 9.75 in |
|---|---|
| Base eye to first port (K4) | 4.00 in, center to center on nonmoving side |
| Port boss outside diameter (K2) | 0.875 in; does not identify connection size |
| Port boss height (K3) | 0.75 in from boss base |
| Plug hex socket (K0) | 0.25 in; tool size, not hydraulic connection size |
| Port orientation (K5) | 90 degrees from sensor; sensor on top, ports left when viewed from rod end |
| Connection type | Unverified; no external threading reported |
| Connector (M) | M12, 4 pins |
|---|---|
| Sensor specifications | Voltage, pinout, output, travel range and operating condition unspecified |
| Connector heights (M4a/M4b) | 0.50 in uncapped / 0.715 in capped, above mounting face |
| Guard height (L1) | 1.50 in above body crown |
| Guard clear openings (L2/L2b) | 1.25 in top / 2.325 in base; flared legs |
| Guard strap (L3/L4) | 0.75 in wide along cylinder axis / 0.1230 in thick |
| Guard-to-sensor offset (L5) | 0.75 in axially, center to center |
| Bore / usable stroke / pressure rating | Not established |
|---|---|
| Hydraulic action | Not established |
| Qualification | Seller-measured sample dimensions; no manufacturing tolerances assigned |
|---|
| Condition | New and unused; cosmetic marks and scuffs from shipping |
|---|
| Included | One cylinder with attached sensor and bracket; no additional accessories |
|---|
Resources
Documentation
- Preliminary external drawing and specifications — inchespdf
Revision P02. Three-sheet external arrangement and measurement register. Provisional geometry is identified; not for manufacture.
CAD files
- Preliminary external assembly — STEPstep
External envelope with spherical inserts and corrected port side. Bore, stroke, internals, fits and some contours/locations are unverified. Not a manufacturing or verified fit model. STEP uses millimetres internally; drawing dimensions are inches.